Proper adhesion and long-term performance of vinyl graphics and signage depend heavily on the condition of the installation surface. Because the manufacturer does not control surface preparation, environmental conditions, or installation practices after delivery, certain limitations apply.

Surface Condition

Vinyl graphics adhere best to clean, smooth, properly painted, and fully cured surfaces.

Surfaces that may cause adhesion issues include:

dusty or dirty surfaces
textured or porous materials
freshly painted surfaces that have not fully cured
surfaces exposed to oils, waxes, or silicone products
aged, chalking, or deteriorating paint

Failure of vinyl to properly adhere due to surface condition is not considered a product defect.

Paint Damage Risk

Removal of vinyl graphics may damage paint or underlying surfaces, particularly when:

paint was previously damaged or poorly bonded
surfaces were repainted without proper preparation
paint was not fully cured
the surface is old or weathered

Vinyl removal may occasionally lift paint or surface coatings.
This is a known risk associated with adhesive vinyl products and is not the responsibility of the manufacturer or printer.

Vehicle Graphics

Vehicle paint quality varies significantly depending on the age of the vehicle, prior repairs, and repainting.

When applying vinyl graphics or magnets to vehicles:

surfaces must be clean and smooth
magnetic signs must be removed periodically to clean both surfaces
magnets should not be used on recently repainted vehicles

The customer assumes responsibility for verifying that the vehicle surface is suitable for graphics installation.

Magnetic Signs

Vehicle magnets require proper maintenance:

remove and clean regularly
ensure both magnet and vehicle surface are dry
avoid installation over body seams, trim, or rust

Failure to maintain magnetic signs may result in paint discoloration, surface marks, or loss of magnetic adhesion.

These conditions are not considered product defects.

Environmental Conditions

Extreme temperatures, moisture, and UV exposure may affect vinyl performance.

Installation should not be performed:

during rain
on wet surfaces
in freezing temperatures
on surfaces exposed to heavy condensation

Improper installation conditions may lead to premature failure of the graphics.

Customer Responsibility

By accepting delivery or installation of printed graphics, the customer acknowledges the limitations of adhesive materials and assumes responsibility for proper installation and surface suitability.

Quarter Cheaper Signs is not responsible for damage to surfaces, paint, glass, or other substrates resulting from installation or removal of graphics.

Installation & Surface Liability Policy

Products